Free Shipping. No cost 30-days Return!
How do you install the everydrop® EDR5RXD1, Filter 5?
The filter compartment for everydrop® EDR5RXD1, Filter 5 is located in the upper right hand corner inside the refrigerator or in the base grille. Lift the filter door up, pull the filter out and discard it.
Open your new EDR5RXD1 and remove the protective covering from the O-rings. Make sure the O-rings are still in place after the cover has been removed.
When inserting the EDR5RXD1 into the slot, make sure the arrow is pointing upward. Do not force the water filter. If it does not slide in easily, rotate it until the notches are properly aligned with the grooves.
Push the filter door closed so it snaps into place. Flush the dispenser and you’ll be ready for 6 more months of clean, fresh tasting ice and water.
Specifications:
Brand: Whirlpool everydrop
Part Number: EDR5RXD1
UPC: 883049411934
Pack Size: 1
Product Weight: 0.66 lb
Filter Life (Months): 6
Filter Life (Gallons): 200
Filter Media: Carbon Block
Dimensions: 2.12″D x 2.12″W x 10.5″H
Flow Rate: 0.78 gpm
Operating Pressure: 30 – 120 psi
Operating Temperature: 33 – 100 °F
NSF Certification(s): 42, 53